{"product_id":"lexus-gx550-magsafe-charger-holder","title":"MagSafe Charger Holder for Lexus GX550 – Keeps 12V Free","description":"\u003cp\u003e\u003cstrong\u003eYour phone finally has a home in the GX550.\u003c\/strong\u003e This holder bonds to the trim beside the centre stack and holds your Apple MagSafe or Samsung magnetic charger exactly where your eyes and hand already go: high enough to glance at navigation, low enough to stay out of the way, and angled toward the driver. It's shaped to follow the GX550's factory trim surface, so it looks like it came with the car, not like something bolted onto it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe 12V port stays free.\u003c\/strong\u003e Most GX550 charger mounts plug into the 12V socket to hold themselves up. This one doesn't touch it, so the port stays open for a high-output USB-C car adapter. That's what lets the newest MagSafe charger run at its full 25W.\u003c\/p\u003e\n\u003ch3\u003eWhy it's different\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMade for this car only.\u003c\/strong\u003e We designed it from a precision 3D scan of the GX550's dash trim. The underside follows the trim's real surface, its edge runs along the factory groove, and the base tapers to thin edges at the sides and rear so it blends in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean, dedicated spot.\u003c\/strong\u003e Your phone snaps on magnetically and sits angled toward the driver. You can see the screen at a glance, and the infotainment screen and the controls you use while driving stay in reach.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eKeeps the 12V port open.\u003c\/strong\u003e The holder bonds to the trim, not the socket. Plug a 30W or larger USB-C adapter into the 12V port and the latest MagSafe charger can deliver up to 25W to a compatible iPhone.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHidden cable.\u003c\/strong\u003e The charger cable runs through the inside of the holder and comes out low on the dash side. The stem is hollow, so you can tuck the spare cable inside instead of leaving a loop hanging.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCharger sits flush.\u003c\/strong\u003e The cup is sized to the charger puck, so the charger sits flush with the face and the phone sits flat on it.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTough matte finish.\u003c\/strong\u003e It's made from a resilient engineering plastic that flexes a little instead of cracking. The low-sheen matte surface cuts glare, hides fingerprints and light scuffs, and matches the satin look of the factory trim. Wipe it clean with a damp cloth or an alcohol wipe.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNo modifications.\u003c\/strong\u003e You don't drill, screw, pry off trim or wire anything. If you remove it later, the car goes back to stock.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eReady-to-install kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSeverForm GX550 charger holder, with \u003cstrong\u003e3M VHB tape pre-applied\u003c\/strong\u003e in recesses under the base. It's the same tape we use on all our parts, and it stays out of sight once the holder is installed.\u003c\/li\u003e\n\u003cli\u003eAlignment spacer, which sets the holder in exactly the designed position\u003c\/li\u003e\n\u003cli\u003e2 extra 3M VHB strips to hold the charger in the cup, if you need them\u003c\/li\u003e\n\u003cli\u003eAlcohol prep pad for cleaning the trim\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNot included:\u003c\/strong\u003e the MagSafe charger and the 12V USB-C car adapter. This is the holder only, so you can use the charger you already own, or pick up the official one.\u003c\/p\u003e\n\u003ch3\u003eCompatible chargers\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eApple MagSafe Charger, braided cable:\u003c\/strong\u003e the newer charger with the woven cable, which supports up to 25W.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSamsung Magnet Wireless Charger (EP-P2900)\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIt doesn't fit the original Apple MagSafe Charger with the smooth rubber cable.\u003c\/p\u003e\n\u003cp\u003eWorks with any MagSafe iPhone (iPhone 12 and later) or a phone in a MagSafe or magnetic case. Galaxy phones need a magnetic case to hold on the charger. Charging speed depends on your phone, charger and adapter. For the full 25W, use the braided MagSafe charger with an iPhone 16 or later and a 30W or larger USB-C car adapter.\u003c\/p\u003e\n\u003ch3\u003eSet up in about 10 minutes\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003eFit the charger.\u003c\/strong\u003e Press your charger into the cup with its cable in the notch at the bottom. It's a snug friction fit. If it isn't tight enough for you, add the included VHB strips behind the charger.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoute the cable.\u003c\/strong\u003e Feed the USB-C end into the hole just below the notch. It comes straight out of the lower hole on the dash side. Tuck any spare cable inside the hollow stem.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eClean the trim.\u003c\/strong\u003e Wipe the mounting area with the included alcohol pad and let it dry.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLine it up.\u003c\/strong\u003e Set the alignment spacer in the trim groove in front of the mounting spot. Lower the holder with its edge along the groove and slide it forward until it rests against the spacer. Dry-fit it first with the liners still on.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStick it down.\u003c\/strong\u003e Peel the 3M liners, set the holder back against the spacer, and press it down firmly from front to back. Slide the spacer out.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLet it cure.\u003c\/strong\u003e Plug in your adapter and give the tape 24 hours to build full strength before you load it.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eComing off is just as easy\u003c\/h3\u003e\n\u003cp\u003eNothing on the car is changed. To remove the holder, apply a little rubbing alcohol along the edge and gently peel it away. Any leftover adhesive rolls off with your thumb, and the trim should be left clean.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003eLexus GX550, 2024 and later, left-hand drive. It doesn't fit other vehicles.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDesigned and made in Canada by SeverForm.\u003c\/em\u003e\u003c\/p\u003e","brand":"SeverForm","offers":[{"title":"Default Title","offer_id":48438750871708,"sku":"SF-GXLC-MAG-V1","price":42.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0743\/3342\/1724\/files\/9607A6C2-0A24-41F9-B4BD-EA4BB862B61B.png?v=1794639124","url":"https:\/\/severform.com\/products\/lexus-gx550-magsafe-charger-holder","provider":"SeverForm","version":"1.0","type":"link"}